① Subject content and scope of application This standard specifies the appearance requirements of cosmetic products.
This standard applies to all types of cosmetics.
②Packaging classification is divided into: bottles (including plastic bottles and glass bottles) according to the types of packaging materials of cosmetics;
Cover [including outer cover, inner cover (plug, pad)];
Bags (including paper bags, plastic bags, composite bags);
hose;
Boxes (including cartons, plastic boxes, and iron boxes);
Spray can
Ingot tube (including lipstick tube, foundation tube);
Makeup Pen;
Outer box packaging (including flower boxes, medium boxes, and large boxes);
other.
③ Cosmetic product packaging appearance requirements
All materials of product packaging should be non-toxic and safe.
3.1 bottles
3.1.1 The bottle body is complete, stable and straight, smooth, basically uniform in thickness, free of cold bursts, cracks, and no obvious scars or deformation.
3.1.2 The bottle mouth is straight and smooth, free of burrs (burrs), and the thread and other matching structures are intact and straight.
3.1.3 The inside and outside of the bottle are clean.
3.1.4. The bottle and the cap should be matched tightly without slippage, loosening, or leakage. Collected and sorted out on the education network.
3.2 cover
3.2.1 Inner cover
3.2.1.1 Complete, smooth, no deformation, clean, free of dust, oil, etc.
3.2.1.2 It fits well with the bottle and outer cap, and should not be leaked.
3.2.2 Outer cover
3.2.2.1 It is straight, smooth, free from cracks, cracks, burrs (burrs) and bursting, with uniform color, no color migration, and consistent with the quasi-sample.
3.2.2.2 The thread and other matching structures are intact.
3.2.2.3 The anodized aluminum or bronzing shall be uniform and complete, and the color and luster shall be consistent with the standard sample.
3.2.2.4 Clamshell type outer cover can be turned up flexibly.
3.2.2.5 The cap and the bottle are tightly matched, and there is no slippage, looseness, leakage, etc.
3.3 bags
3.3.1 There should be no wrinkles, scratches, air bubbles, and the color is consistent with the standard sample.
3.3.2 The sealing should be firm and correct, and there should be no openings, perforations, leakage of paste (liquid), etc.
3.3.3 The composite bag is firm and evenly coated.
3.4 hose
3.4.1 The tube body is smooth, tidy, uniform in thickness, without obvious scratches, and the color is consistent with the standard sample.
3.4.2 The sealing should be firm, and there should be no openings, wrinkles, etc.
3.4.3 Cover should meet
3.2 Requirements.
3.5 boxes
3.5.1 The surface of the box is smooth and straight, without obvious scratches and burrs (burrs), and the color is uniform, consistent with the standard sample.
3.5.2 The opening is tight and suitable to meet the test requirements of 4.2.
3.5.3 The mirror surface and the contents in the box are firmly bonded to the box, and the mirror image is good. There are no scratches and damages on the bottom.
3.6 Spray cans
3.6.1 The tank body is flat, no rust spots, smooth welding seams, no obvious scratches on the main parts, and uniform color, which is consistent with the standard sample.
3.6.2 The roll mouth is smooth and free of cracks and deformation.
3.6.3 The cover shall meet the requirements of 3.2.
3.7 Ingot tube
3.7.1 The tube body is straight and smooth, without obvious scratches, and the color is uniform, consistent with the standard sample.
3.7.2 The tube body is suitable for tightness, and the paste should be screwed out or pushed out normally.
3.8 Cosmetic pencil
3.8.1 The pen barrel should be smooth and straight, the pen barrel should not be glued, and the paint should not be cracked.
3.8.2 The surface of the pen cover is smooth and clean, and the tightness is appropriate.
3.8.3 The logo should be complete and clear.
3.9 Trademarks, manuals, box header stickers and certificates of conformity.
3.9.1 Printed trademarks should have correct patterns, distinct colors, and clear and firm writing.
3.9.2 The trademark must be firmly pasted, and must not be skewed, missed, upside-down, or wrongly pasted. After being pasted, it will not tilt the corners or edges.
3.9.3 The printing surface of the manual is neat and clear, and the handwriting is clear.
3.9.4 The box head (sticker) is printed with clear writing and patterns.
3.9.5 The printed handwriting and pattern of the certificate are clear, and there are signs such as factory name and inspector code.
3.10 Outer box packaging (flower box, medium box, large box
3.10.1 Flower box
3.10.1.1 The flower box should be tightly matched with the medium box packaging.
3.10.1.2 The flower box should be clean, upright, flat and free of wrinkles, missing edges, or missing corners.
3.10.1.3 The bonding part of the flower box is firmly bonded, without sticking marks, cracks, and mutual adhesion, and the color is uniform and consistent with the standard sample.
3.10.1.4 There is no wrong installation, missing installation, or upside-down installation in the product. The lid is closed.
3.10.1.5 The flower box (including product packaging) of the product should indicate the product’s trademark, product name, factory name, factory address, production date (shelf life), capacity or quality, and license number, and instructions for use should be provided when necessary.
3.10.2 Medium Box
3.10.2.1 The middle box should be clean, upright and flat.
3.10.2.2 The product has no wrong installation, missing installation, or upside-down installation.
3.10.2.3 The box head (sticker) should be correct, clear, and complete, and should be marked with product name, quantity, and factory name.
3.10.3 large box
3.10.3.1 The large box should be clean, upright, smooth, and tightly sealed.
3.10.3.2 The product has no wrong installation, missing installation, or upside-down installation.
3.10.3.3 The signs outside the big box should be clear, complete, and located in an appropriate location, with signs such as product name, factory name, factory address, license number, specification, quantity, gross weight, volume, date of manufacture, and precautions.
3.11 Other
3.11.1 Pump spray cans shall meet the corresponding requirements in 3.1 and 3.6.
3.11.2 The shelf life of the product is marked. If the product quality is more than three years without problems, it may not be marked.
3.11.3 The implemented standard number should be marked on the product or its instructions and packaging.
④Test method
4.1 The visual inspection and standard comparison should meet the specified requirements.
4.2 Tightness test of box products.
4.2.1 The tolerance range of the bottled product capacity stipulates that the sample cannot be peeled off forcefully with your fingers, pinch the edge of the cover, and the bottom does not fall as the test is qualified.
